4.4. Acoustic standards: legislation and guidance
Acoustic standards and guidance have been established to promote good listening conditions and accessible speech for everyone. The standards and guidance provide criteria for school acoustic design and access.
BATOD classroom acoustics – recommended standards
Tmf is the average mid-frequency reverberation time of 500 Hz, 1 kHz, and 2 kHz
Maximum indoor ambient noise level
|
Maximum mid-frequency reverberation time
Tmf seconds |
Signal-to-noise ratio (SNR) |
35 dBA |
≤ 0.4 averaged from 125 Hz to 4 kHz and ≤ 0.6 in every octave band in this range |
20 dB across the frequency range 125 Hz to 750 Hz
and 15 dB across the frequency range 750 Hz to 4,000 Hz |
Building Bulletin 93 (BB93)
The guidance for new build schools and classroom refurbishments in the UK are set out in BB93. Different performance standards are set out for learning spaces in primary and secondary schools and school-site maintained nursery settings, and enhanced acoustic criteria for deaf pupils and pupils with specific hearing and communication needs are also included.
BB93 states that school senior leaders “…should anticipate the needs of deaf and other disabled children as current and future users of the school”.
Table 1: BB93 acoustic performance standards
Classroom
specifically for children with special hearing and communication needs
|
Maximum unoccupied ambient noise level
(Table 1) |
Maximum mid-frequency reverberation time
Tmf seconds (Table 6) |
Newbuild |
30 dB |
≤ 0.4 averaged from 125 Hz to 4 kHz and ≤ 0.6 in every octave band in this range |
Refurbishment
|
35 dB |
≤ 0.4 |
Equality Act 2010/Disability Discrimination Act*
Schools and local authorities have a duty to make ‘reasonable adjustments’ so that children and young people are not disadvantaged by a long-term disability.
*Disability Discrimination Act still applies in Northern Ireland
Acoustics of schools: a design guide
Chapter 6: Acoustic design and equipment for pupils with ‘special hearing requirement; states that:
“Favourable acoustic conditions will benefit large numbers of pupils within mainstream schools who have special hearing requirements. These pupils include pupils:
- with permanent hearing impairment
- with speech, language and communication difficulties
- whose first language is not English
- with visual impairments
- with fluctuating hearing impairments caused by conductive hearing loss
- with attention deficit hyperactivity disorders (ADHD)
- with an auditory processing disorder or difficulty
Together, the number of pupils falling into one or more of these categories could conceivably be a significant proportion of every mainstream classroom. It is therefore important to consider every teaching and learning space as being one where there are pupils who have special hearing requirements.” (p.63)
Considerations for QToDs
- Has the acoustic audit of learning spaces been completed?
- Has the school considered if and how classroom acoustics could be improved over time to improve access to learning? If acoustics could be improved, has the school included this in their school accessibility plan?
- Acoustic standards also apply to temporary buildings (see BB93).
- Disability access fund (England) – A fund for early years settings to make ‘reasonable adjustments’ to improve access to early education for 3–4-year-olds who receive Disability Living Allowance.
Further information
BB93 guidance: acoustic design of schools – performance standards
MESHGuide ‘Acoustics’
Acoustics of schools: A design guide (Institute of Acoustics and Association of Noise Consultants, 2015)
- NDCS Acoustic Toolkit publication (Archived publication – available with consent from the National Deaf Children’s Society))
- Introduction
- Noise Surveys (Schools)
- Reverberation Times (Schools)
- Speech Intelligibility (Schools)
- Assistive Devices (Schools)
- Noise Surveys (Specialists)
- Reverberation Times (Specialists)
- Appendix A How to create a graph
- Appendix B BB93 Performance standards
- Appendix C BRE Absorption coefficients
- Appendix D1 LIFE-UK IHP
Next pages in section 4
Previous pages in section 4
4.1 Characteristics of sound sources and rooms
4.2 Room acoustics listening and speech intelligibility
4.3 Acoustic properties of a room
Other sections
- Section 1 Anatomy and physiology of the ear
- Section 2 Aetiology and types of deafness
- Section 3 Auditory perception and hearing testing
- Section 5 Listening skills and functional hearing
- Section 6 Hearing technologies